Model Number: YFH320
Brand Name: TYF(Yinfeng)
Key Specifications/Special Features:
Turss/lattice girder welding machine introduction:High speed:18-36 m/minHigh automation with Mitsubishi PLCUse to process φ5mm-12mm barsWorking process:Five Coiled rebar→dragged from pay-off device→straightening→bending→welding→forming→cutting→collecting→end product will be triangle special lattice girder.One operator
Save labor cost
Lattice/Truss Girder Welding Machine Specification | |||
Item | Unit | Quantity | Remarks |
Pay off Device Load-bearing | 1 | 2000 | |
Quantity of Pay Off Device | Piece | 5 | |
Straightening Speed | m/min | 30 | |
Feeding Motor Power | kw | 7.5 | |
Straightening Motor Power | kw | 7.5X3 | Variable frequency motor, intermittent working |
Forming Motor Power | kw | 2X5 | Servo Motor |
Welding Transformer Power | KVA | 200X4 | |
Hydraulic Cutting Power | kw | 11KW | Intermittent working |
Max Pressure of Hydraulic Device | MPa | 25 | |
Max Cutting Rebar Diameter | mm | 12 | |
Bending Motor Power | kw | 7.5 | Servo Motor |
Collect Chain Motor Power | kw | 2.2 | Variable frequency motor, intermittent working |
Collect Lift Motor Power | kw | 2.2 | Variable frequency motor, intermittent working |
Diagonal Rebar Bending Space | mm | 200 | |
Height of Lattice Girder | mm | 50-320 | |
Width of Lattice Girder | mm | 60-90 | |
Longitudinal Wire Diameter | mm | 5-12 | |
Diagonal Wire Diameter | mm | 4-7 | |
Length of Lattice Girder | m | 2.4~12 | |
Production Speed | m/min | ≤20 | |
Air Circuit Pressure | MPa | 0.6 | |
Gas consumption | m3/min | 1.8 |
Shipping Information:
- FOB Port: Tianjin
- Lead Time: 30 - 40 days
- Dimensions per Unit: 43 × 5 × 4.5 Meters
- Units per Export Carton: 1
- Export Carton Dimensions L/W/H: 12.2 × 2.4 × 2.9 Meters
- Export Carton Weight: 4000 Kilograms
Main Export Markets:
- Asia
- Eastern Europe
- North America
- Western Europe